Cisco ASR 901

1-181
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
show policy-map interface
Related Commands Command Description
class-map Creates a class map to be used for matching packets to a specified class.
police Configures traffic policing.
police (percent) Configures traffic policing on the basis of a percentage of bandwidth
available on an interface.
police (two rates) Configures traffic policing using two rates, the CIR and the PIR.
policy-map Creates or modifies a policy map that can be attached to one or more
interfaces to specify a service policy.
priority Specifies that low-latency behavior must be given to a traffic class and
configures multiple priority queues.
shape (percent) Specifies average or peak rate traffic shaping on the basis of a percentage
of bandwidth available on an interface.
show class-map Display all class maps and their matching criteria.
show interfaces Displays statistics for all interfaces configured on a router or access server.
show policy-map Displays the configuration of all classes for a specified service policy map
or all classes for all existing policy maps.
show policy-map class Displays the configuration for the specified class of the specified policy
map.