Cisco ASR 901

1-148
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
show atm cell-packing
show atm cell-packing
To display cell packing information for the Layer 2 attachment circuits (ACs) configured on your system,
use the show atm cell-packing command in privileged EXEC mode.
show atm cell-packing
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC
Command History
Examples The following example shows output from the show atm cell-packing command:
Router# show atm cell-packing
avg # avg #
Circuit local cells/pkt negotiated cells/pkt MCPT
Type MNCP rcvd MNCP sent (us)
ATM0/2/0/1.200 vc 1/200 1 0 1 0 50
ATM0/2/0/1.300 vc 1/300 1 0 1 0 50
Related Commands
Release Modification
15.1(2)SNG Support for this command was introduced on the Cisco ASR 901 router.
Command Description
cell-packing Packs multiple ATM cells into each MPLS or L2TPv3 packet.
atm cell-packing Packs multiple ATM cells into each MPLS or L2TPv3 packet.