Cisco ASR 901 User Manual

1-108
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
ql-enabled rep segment
ql-enabled rep segment
Specifies the REP segment used for synchronous Ethernet clock selection.
ql-enabled rep segment segment-id
no ql-enabled rep segment segment-id
Syntax Description
Defaults There is no default setting.
Command Modes Global configuration
Command History
Usage Guidelines This command requires that you specify a synchronous Ethernet clock source.
Examples The following example shows how to use the
ql-enabled command:
Router# config t
Router(config)# ql-enabled rep segment 5
Router(config)# exit
Related Commands
segment Specifies a REP segment.
segment-id The REP segment ID of the REP segment
Release Modification
15.1(2)SNG Support for this command was introduced on the Cisco ASR 901 router.
Command Description
rep segment Enables Resilient Ethernet Protocol (REP) on an interface assigns a
segment ID.

Cisco ASR 901 Specifications

General

Form Factor	Rack-mountable
Operating Temperature	-40 to 65°C
Product Type	Aggregation Services Router
Rack Height	1 RU
Storage Temperature	-40 to 70°C
Humidity	5% to 95% non-condensing
Weight	4.5 kg
Power Supply	AC or DC
Compliance	RoHS, CE, FCC
Redundancy	Dual power supply option
MTBF	320, 000 hours