Cisco ASR 901 User Manual

1-168
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
show platform hardware
show platform hardware
To display the status of hardware devices on the Cisco ASR 901, use the show platform hardware
command. The command displays information about hardware devices on the Cisco ASR 901 for
troubleshooting and debugging purposes.
show platform hardware {adrian | bits | cpld | cpu | ethernet | fio | hwic | rtm | stratum | ufe
winpath
Syntax Description
Command Modes Privileged EXEC
Command History
Related Commands
adrian Displays information about the adrian hardware.
bits Displays information about the BITS hardware.
cpld Displays information about the CPLD hardware.
cpu Displays information about the CPU.
ethernet Displays information about the ethernet interfaces on the Cisco ASR 901.
fio Displays information about the FIO fpga hardware.
hwic Displays information about the HWICs installed on the Cisco ASR 901.
rtm Displays information about the RTM Module (ASM-M2900-TOP daughter card).
stratum Displays information about the stratum hardware.
ufe Displays information about the UFE hardware.
winpath Displays information about the Winpath hardware.
Release Modification
15.1(2)SNG Support for this command was introduced on the Cisco ASR 901 router.
Command Description
show controller Displays the status of system controllers.

Cisco ASR 901 Specifications

General

Form Factor	Rack-mountable
Operating Temperature	-40 to 65°C
Product Type	Aggregation Services Router
Rack Height	1 RU
Storage Temperature	-40 to 70°C
Humidity	5% to 95% non-condensing
Weight	4.5 kg
Power Supply	AC or DC
Compliance	RoHS, CE, FCC
Redundancy	Dual power supply option
MTBF	320, 000 hours