Cisco ASR 901

1-14
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
asr901-platf-frr enable
asr901-platf-frr enable
To enable traffic engineering (TE) Fast Reroute (FRR) link protection on the Cisco ASR 901 router, use
the asr901-platf-frr command in global configuration mode. To delete this configuration, use the no
form of this command.
asr901-platf-frr enable
no asr901-platf-frr enable
Syntax Description This command has no arguments or keywords.
Command Default The TE-FRR functionality is not enabled.
Command Modes Global configuration (config)
Command History
Examples The following example shows how to enable TE-FRR on the Cisco ASR 901 router:
Router# configure terminal
Router#(config) asr901-platf-frr enable
Release Modification
15.2(2)SNG This command was introduced.