Cisco ASR 901

1-154
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
show etherchannel
Examples The following example shows how to verify the configuration:
Router# show etherchannel load-balance
EtherChannel Load-Balancing Configuration:
src-dst-mac
EtherChannel Load-Balancing Addresses Used Per-Protocol:
Non-IP: Source XOR Destination MAC address
IPv4: Source XOR Destination MAC address
IPv6: Source XOR Destination MAC address (routed packets)
Source XOR Destination IP address (bridged packets)
Related Commands Command Description
channel-group Assigns and configures an EtherChannel interface to an EtherChannel group.
channel-protocol Sets the protocol that is used on an interface to manage channeling.