Cisco ASR 901 User Manual

1-55
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
ip tos
ip tos
To configure the Type of Service (ToS) level for IP traffic, use the ip tos command in pseudowire class
configuration mode. To disable a configured ToS value, use the no form of this command.
ip tos value value_number
no ip tos value value_number
Syntax Description
.
Defaults The default ToS value is 0.
Command Modes Pseudowire class configuration
Command History
Examples
Router(config) # pseudowire-class ether-pw
Router(config-pw)# ip tos value 1
Related Commands
value value_number Specifies the type of service (ToS) level for IP traffic in the pseudowire.
Release Modification
15.1(2)SNI Support for this command was introduced on the Cisco ASR 901 router.
Command Description
pseudowire-class Specifies the name of a Layer 2 pseudowire-class and enters
pseudowire-class configuration mode.

Cisco ASR 901 Specifications

General

Form Factor	Rack-mountable
Operating Temperature	-40 to 65°C
Product Type	Aggregation Services Router
Rack Height	1 RU
Storage Temperature	-40 to 70°C
Humidity	5% to 95% non-condensing
Weight	4.5 kg
Power Supply	AC or DC
Compliance	RoHS, CE, FCC
Redundancy	Dual power supply option
MTBF	320, 000 hours