Cisco Catalyst 2960-XR Configuration Guide

PurposeCommand or Action
Returns to privileged EXEC mode.end
Example:
Switch(config)# end
Step 4
Related Topics
Loop Guard, on page 90
Monitoring the Spanning-Tree Status
Table 14: Commands for Monitoring the Spanning-Tree Status
Displays spanning-tree information on active interfaces only.show spanning-tree active
Displays a detailed summary of interface information.show spanning-tree detail
Displays spanning-tree information for the specified interface.
show spanning-tree interface interface-id
Displays MST information for the specified interface.show spanning-tree mst interface
interface-id
Displays a summary of interface states or displays the total
lines of the spanning-tree state section.
show spanning-tree summary [totals]
Additional References for Optional Spanning Tree Features
Related Documents
Document TitleRelated Topic
Catalyst 2960-XR Switch Layer 2
Command Reference
Layer 2 commands
Catalyst 2960-XR Switch Layer 2 Configuration Guide, Cisco IOS Release 15.0(2)EX1
102 OL-29424-01
Configuring Optional Spanning-Tree Features
Monitoring the Spanning-Tree Status

Cisco Catalyst 2960-XR Specifications

General

Stacking Bandwidth	80 Gbps
Layer Support	Layer 2 and Layer 3
Jumbo Frame Support	9198 bytes
RAM	512 MB
Input Voltage	100-240V AC
Model	Catalyst 2960-XR
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Downlink Interfaces	24 or 48 x Gigabit Ethernet ports
Power Supply	Internal
MAC Address Table Size	16, 000 entries
PoE	Available on PoE models
Weight	4.5 kg
Features	energy efficiency
Stacking	Up to 8 switches
Operating Temperature	0 to 45°C