Cisco Catalyst 2960-XR Configuration Guide

Protocol Migration Process, on page 58
Monitoring MST Configuration and Status
Table 13: Commands for Displaying MST Status
Displays the MST region configuration.show spanning-tree mst configuration
Displays the MD5 digest included in the current MSTCI.show spanning-tree mst configuration
digest
Displays MST information for the all instances.
This command displays information for ports in a link-up
operative state.
Note
show spanning-tree mst
Displays MST information for the specified instance.
This command displays information only if the port is
in a link-up operative state.
Note
show spanning-tree mst instance-id
Displays MST information for the specified interface.show spanning-tree mst interface
interface-id
Additional References for MSTP
Related Documents
Document TitleRelated Topic
Catalyst 2960-XR Switch Layer 2
Command Reference
Layer 2 commands
Standards and RFCs
TitleStandard/RFC
—
None
Catalyst 2960-XR Switch Layer 2 Configuration Guide, Cisco IOS Release 15.0(2)EX1
76 OL-29424-01
Configuring Multiple Spanning-Tree Protocol
Monitoring MST Configuration and Status

Cisco Catalyst 2960-XR Specifications

General

Stacking Bandwidth	80 Gbps
Layer Support	Layer 2 and Layer 3
Jumbo Frame Support	9198 bytes
RAM	512 MB
Input Voltage	100-240V AC
Model	Catalyst 2960-XR
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Downlink Interfaces	24 or 48 x Gigabit Ethernet ports
Power Supply	Internal
MAC Address Table Size	16, 000 entries
PoE	Available on PoE models
Weight	4.5 kg
Features	energy efficiency
Stacking	Up to 8 switches
Operating Temperature	0 to 45°C