Cisco Catalyst 2960-XR Configuration Guide

PurposeCommand or Action
Example:
Switch# configure terminal
Enables the switch to obtain and processes the MAC
address-table move updates.
mac address-table move update receive
Example:
Switch (config)# mac address-table move update
Step 2
receive
Returns to privileged EXEC mode.end
Example:
Switch (config)# end
Step 3
Related Topics
Monitoring Flex Links and the MAC Address-Table Move Update, on page 160
Configuring the MAC Address-Table Move Update: Examples, on page 163
MAC Address-Table Move Update, on page 151
Restrictions for Configuring Flex Links and MAC Address-Table Move Update, on page 147
Configuring the MAC Address-Table Move Update: Examples, on page 163
Monitoring Flex Links and the MAC Address-Table Move Update
PurposeCommand
Displays the Flex Links backup interface configured for an interface
or all the configured Flex Links and the state of each active and
backup interface (up or standby mode).
show interface [interface-id]
switchport backup
Displays the MAC address-table move update information on the
switch
show mac address-table move update
Related Topics
Configuring a Preemption Scheme for a Pair of Flex Links, on page 155
Configuring Flex Links, on page 154
Catalyst 2960-XR Switch Layer 2 Configuration Guide, Cisco IOS Release 15.0(2)EX1
160 OL-29424-01
Configuring Flex Links and the MAC Address-Table Move Update Feature
Monitoring Flex Links and the MAC Address-Table Move Update

Cisco Catalyst 2960-XR Specifications

General

Stacking Bandwidth	80 Gbps
Layer Support	Layer 2 and Layer 3
Jumbo Frame Support	9198 bytes
RAM	512 MB
Input Voltage	100-240V AC
Model	Catalyst 2960-XR
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Downlink Interfaces	24 or 48 x Gigabit Ethernet ports
Power Supply	Internal
MAC Address Table Size	16, 000 entries
PoE	Available on PoE models
Weight	4.5 kg
Features	energy efficiency
Stacking	Up to 8 switches
Operating Temperature	0 to 45°C