Cisco Catalyst 4500 Series Installation Guide

xi
Catalyst 4500 Series Switches Installation Guide
78-14409-08
Preface
Conventions
• The command reference appropriate to your software version. Command
references are at:
http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_command
_reference_list.html
• The system message guide appropriate to your software version. System
message guides are at:
http://www.cisco.com/en/US/products/hw/switches/ps4324/products_system
_message_guides_list.html
• There are a number of installation notes and technical tips available for this
switch. The top level Catalyst 4500 documentation and technical support
page is at:
http://www.cisco.com/en/US/products/hw/switches/ps4324/tsd_products_su
pport_series_home.html
Conventions
This document uses the following conventions:
Convention Description
boldface font Commands and keywords are in boldface.
italic font Arguments for which you supply values are in italics.
[ ] Elements in square brackets are optional.
{ x | y | z } Alternative keywords are grouped in braces and
separated by vertical bars.
[ x | y | z ] Optional alternative keywords are grouped in brackets
and separated by vertical bars.
string A nonquoted set of characters. Do not use quotation
marks around the string, because the string will include
the quotation marks.
screen font Terminal sessions and information that the system
displays are in
screen font.
boldface screen
font
Information that you must enter is shown in boldface
screen
font.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E