Cisco Catalyst 4500 Series Installation Guide

Appendix A Specifications
Catalyst 4503 Switch Specifications
A-2
Catalyst 4500 Series Switches Installation Guide
78-14409-08
Catalyst 4503 Switch Specifications
Table A-1 lists the Catalyst 4503 switch specifications.
Ta b l e A-1 Catalyst 4503 Switch Specifications
Item Specification
Environmental
Temperature,
ambient operating 32 to 104°F (0 to 40°C)
Temperature,
ambient nonoperating and storage –40 to 167°F (–40 to 75°C)
Humidity (RH), ambient (noncondensing),
operating
10 to 90%
Humidity (RH), ambient (noncondensing),
nonoperating and storage
5 to 95%
Altitude,
operating and nonoperating –200 to 6500 ft (–60 to 2000 m)
Switching Components
Backplane 24 Gbps full duplex backplane
4 Gbps Uplinks
Port density 116 ports when using a Catalyst 4500 Series Supervisor
Engine II-Plus TS, 96 ports with other supervisor engines
Inline power integrated support, 820 W per switching module
Physical Characteristics
Dimensions (H x W x D) • 12.25 x 17.31 x 12.50 in. (31.12 x 43.97 x 31.70 cm)
• 7 RU
Weight Minimum weight: 31.25 lb (14.1 kg)
Maximum weight: 75 lb (34 kg)
Chassis and backplane: 29 lb (13.1 kg)
Fan tray: 2.25 lb (1.0 kg)

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E