Cisco Catalyst 4500 Series Installation Guide

A-1
Catalyst 4500 Series Switches Installation Guide
78-14409-08
APPENDIX
A
Specifications
Cable and technical specifications for Catalyst 4500 series switches are provided
in the following sections:
• Catalyst 4503 Switch Specifications, page A-2
• Catalyst 4506 Switch Specifications, page A-3
• Catalyst 4507R Switch Specifications, page A-5
• Catalyst 4510R Switch Specifications, page A-7
• Catalyst 4500 Series Power Supplies, page A-9
Note Specifications for individual switching modules and supervisor engines,
including power consumption and thermal output information, are in the Catalyst
4500 Series Module Installation Guide, available online at:
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/module/g
uide/mod_inst.html
Note When populating empty chassis slots, start filling the upper slots first and work
down to the bottom slots.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E