Cisco Catalyst 4500 Series

To Next Page

To Previous Page

Preface

Related Documentation

Refer to the following documents for additional Catalyst 4500 series information:

• For information about individual switching modules and supervisors refer to

the Catalyst

4500 Series Module Installation Guide at:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/mod

ule/guide/mod_inst.html

• Regulatory Compliance and Safety Information for the Catalyst 4500 Series

Switches at:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/regul

atory/compliance/78_13233.html

• The release note appropriate to your software version. Release notes are at:

http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_release_no

tes_list.html

• The software configuration guide appropriate to your software version.

Software configuration guides are at:

http://www.cisco.com/en/US/products/hw/switches/ps4324/products_install

ation_and_configuration_guides_list.html

Chapter 4 Removing and

Replacing FRUs

Describes how to remove and replace field-replaceable units

(FRUs).

Chapter 5 Troubleshooting Provides troubleshooting guidelines for the initial hardware

installation and suggests steps to help isolate and resolve

problems.

Appendix A Specifications Lists the cable and technical specifications of the

Catalyst

4500 series switches.

Appendix B Repacking a Switch Provides instructions for repacking your Catalyst 4500

series switch in the event that you have to return it to the

factory.

Chapter Title Description

Other manuals for Cisco Catalyst 4500 Series