Cisco Catalyst 4500 Series

Chapter 1 Product Overview
Switch Features
1-8
Catalyst 4500 Series Switches Installation Guide
78-14409-08
Supervisor engine
support
• Supports the Supervisor Engine II, II+, II+10GE, III, IV, V, 6-E
• Holds the ASIC-based forwarding engine (data path) and the
management processor and software (control path)
• Features interface monitoring, environmental status, and SNMP and
console/Telnet interface
Note Packets are not forwarded while the module is removed; a system
reboot occurs when a supervisor engine is reinserted.
Switching module
support
• 24-port 10/100BASE-TX Fast Ethernet switching module
(WS-X4124-RJ45)
• 24-port 100BASE-FX Fast Ethernet switching module
(WS-X4124-FX-MT)
• 48-port 100BASE-FX Fast Ethernet switching module
(WS-X4148-FX-MT)
• 48-port 100BASE-LX10 Fast Ethernet switching module
(WS-X4148-FE-LX-MT)
• 48-port 10/100-Mbps Fast Ethernet switching module (WS-X4148-RJ)
• 48-port 100BASE-BX10-D Fast Ethernet switching module
(WS-X4148-FE-BD-LC)
• 48-port 10/100-Mbps Fast Ethernet switching module
(WS-X4148-RJ21)
• 48-port Cisco pre-standard Power over Ethernet (PoE)
10/100BASE-TX
switching module (WS-X4148-RJ45V)
• 24-port IEEE 802.3af-compliant PoE 10/100BASE-TX switching
module (WS-X4224-RJ45V)
• 48-port IEEE 802.3af compliant PoE 10/100BASE-TX RJ-45 switching
module (WS-X4248-RJ45V)
• 48-port 100BASE-X Fast Ethernet switching module
(WS-X4248-FE-SFP)
• 48 port IEEE 802.3af compliant PoE 10/100BASE-TX RJ-21 switching
module (WS-X4248-RJ21V)
Table 1-2 Features of the Catalyst 4506 Switch (continued)
Feature Description