Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine User Manual

C-1
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
APPENDIX
C
Command Reference
This appendix summarizes the command line interface (CLI) commands of the Cisco Secure ACS
Solution Engine (ACS SE).
This appendix contains:
• CLI Conventions, page C-1
• Command Privileges, page C-1
• Checking Command Syntax, page C-2
• System Help, page C-2
• Command Description Conventions, page C-3
• Command Description Conventions, page C-3
• Commands, page C-3
CLI Conventions
The CLI uses the following conventions:
• The key combination ^c, or Ctrl-c, means hold down the Ctrl key while you press the c key.
• A string is defined as a nonquoted set of characters.
Do not confuse the ACS SE CLI with the IOS CLI. Though they are similar, they are not identical.
Command Privileges
Access to CLI commands on the ACS SE is limited to those who physically connect via the console port
and who possess the proper administrative credentials.
Note The CLI administrator does not have access to the ACS web GUI. To create an initial GUI administrator
account that allows web access to the ACS SE GUI, use the add-guiadmin command to create a GUI
account.
For more information about establishing the console connection, see Establishing a Serial Console
Connection, page 3-10.

Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Specifications

General

Brand	Cisco
Model	CSACSE-1111-K9 - Secure Access Control Server Solution Engine
Category	Software
Language	English