4-11
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
Chapter 4 Administering Cisco Secure ACS Solution Engine
Working with System Data
Result: The ACS SE exports the specified files to the specified location.
Exporting a List of Groups
This section details the procedure for exporting a list of ACS SE user groups to an FTP server for further
examination and processing.
Before You Begin
You must have the FTP server address and pathname, as well as the proper credentials for writing to the
FTP server (username and password).
Caution Performing this procedure stops and restarts the CSAuth service, and will interrupt use of the ACS SE.
To export a user group list to an FTP server:
Step 1 Log in to the ACS SE. For more information, see Logging In to the Solution Engine From a Serial
Console, page 4-2.
Step 2 Type exportgroups.
Tip You can enter the following parameters after the command or in response to subsequent prompts:
[server] [username] [filepath]
Step 3 Press Enter.
Result: The system displays the message:
Command with restart CSAuth. Are you sure you want to continue?
Caution Performing this procedure stops and restarts the CSAuth service, and will interrupt use of the ACS SE.
Step 4 To proceed, type Y and press Enter.
Step 5 At the Enter FTP Server Hostname or IP Address prompt, enter the FTP server IP address or
hostname and press Enter.
Step 6 At the Directory: prompt, enter the FTP server pathname and press Enter.
Step 7 At the Username: prompt, enter your FTP server username and press Enter.
Step 8 At the Password: prompt, enter your FTP server password and press Enter.
Result: The ACS SE exports the group list file to the specified location. When done the system displays
the message:
Transferring ‘groups.txt’ completed
The system prompt returns.
To Next Page
Loading...
Need help?
General