Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine User Manual

CHAPTER
3-1
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
3
Installing and Configuring Cisco Secure ACS
Solution Engine 4.1
This chapter describes how to install and initially configure Cisco Secure ACS Solution Engine (ACS
SE) 4.1. It contains:
• Installation Quick Reference, page 3-1
• Installing the Cisco 1113 in a Rack, page 3-2
• Connecting to the AC Power Source, page 3-9
• Connecting Cables, page 3-10
• Initial Configuration, page 3-10
• Verifying the Initial Configuration, page 3-15
• Next Steps, page 3-17
Note The details in this guide correspond to the CSACSE-1113-K9 platform only.
Installation Quick Reference
Table 3-1 provides a high-level overview of the installation and initial configuration process. Following
installation and initial configuration, see the User Guide for Cisco Secure ACS for information on how
to use a browser and the web interface to fully configure your ACS SE to provide the AAA services that
you want from this installation.
Ta b l e 3-1 Quick Reference
Task References
Use the rack mount kit to install the
ACS SE in a rack.
Installing the Cisco 1113 in a Rack,
page 3-2
Connect the ACS SE to an AC power
source.
Connecting to the AC Power Source,
page 3-9
Connect network and console cables. Connecting Cables, page 3-10
Perform initial configuration of the
ACS SE
Configuring ACS SE, page 3-11

Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Specifications

General

Brand	Cisco
Model	CSACSE-1111-K9 - Secure Access Control Server Solution Engine
Category	Software
Language	English