Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine User Manual

3-17
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
Chapter 3 Installing and Configuring Cisco Secure ACS Solution Engine 4.1
Initial Configuration
Step 6 At the Enter new password again: prompt, enter the new password again, and press Enter.
Result: The console displays:
GUI Administrator added successfully.
Note The new GUI administrator account is not usable until you unlock it by entering the unlock guiadmin
command.
Now, you can now use the GUI administrator account to remotely access the ACS GUI running on the
ACS SE.
Next Steps
After you have successfully performed the procedures in this guide, your ACS SE is installed and
initially configured. The next step is to log in using the GUI administrator account and use a browser
and the web interface to fully configure your ACS SE to provide the AAA services that you want from
this installation. The HTML address is in the following format: http://<ip address>:2002, where ip
address is the address that you assign during configuration.
For information on setting up user, group, network, and other parameters, see the User Guide for Cisco
Secure ACS.
Note The ACS Solution Engine automatically creates an entry called Self in the AAA Servers Table. This entry
identifies the Solution Engine machine.
However, in the Proxy Distribution Table and the AAA Server Table for RDMS synchronization, the
ACS Solution Engine creates an entry for the hostname of the device that is running the ACS Solution
Engine.

Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Specifications

General

Product Type	Secure Access Control Server Solution Engine
Model	CSACSE-1111-K9
Category	Software
Authentication Protocols	RADIUS, TACACS+
User Database Support	Active Directory, LDAP
Management Interface	Web-based GUI, CLI
High Availability	Yes

Summary

CHAPTER 1 Cisco Secure ACS Solution Engine Overview

System Description

Provides an overview of the ACS SE's functionality and purpose.

ACS SE Hardware Description

CHAPTER 2 Preparing for Installation

Safety

Provides crucial safety instructions and guidelines for installation.

General Precautions

Outlines general safety measures for system usage and handling.

Maintaining Safety with Electricity

Details guidelines for safe operation and maintenance related to electrical power.

Protecting Against Electrostatic Discharge

Explains procedures to prevent damage from static electricity.

Preparing Your Site for Installation

Covers site requirements and environmental considerations for installation.

Required Tools and Equipment

CHAPTER 3 Installing and Configuring Cisco Secure ACS Solution Engine 4.1

Installation Quick Reference

Installing the Cisco 1113 in a Rack

Guides through the physical installation of the Cisco 1113 appliance into a rack.

Connecting Cables

Initial Configuration

Details the steps for performing the initial setup and configuration of the ACS SE.

Verifying the Initial Configuration

Setting Up a GUI Administrator Account

CHAPTER 4 Administering Cisco Secure ACS Solution Engine

Basic Command Line Administration Tasks

Covers essential administrative tasks using the CLI.

Working with System Data

Reconfiguring Solution Engine System Parameters

Explains how to modify system settings like passwords, IP, etc.

Recovery Management

CHAPTER 5 Upgrading and Migrating to Cisco Secure ACS Solution Engine 4.1

Upgrade Scenarios

Migration Scenarios

Upgrade Paths

Upgrade Procedure

Provides step-by-step instructions for performing upgrades.

APPENDIX C Command Reference

Commands