Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine User Manual

5-2
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
Chapter 5 Upgrading and Migrating to Cisco Secure ACS Solution Engine 4.1
Migration Scenarios
Migration Scenarios
• ACS for Windows to ACS SE Migration— You can migrate data from an ACS for Windows server
to the ACS SE 4.1.
• Hardware to Hardware Migration—You can migrate data from earlier versions of the ACS SE
(the Cisco 1111 or the Cisco 1112 platform) to the Cisco 1113 platform.
Upgrade Paths
Depending on the ACS version you are upgrading from, there are different paths for upgrading to ACS
SE 4.1. You can upgrade to ACS 4.1 from ACS version 3.2.x, 3.3.x, 3.3.3 or 4.0.1:
1. ACS 3.2.x or 3.3.x (ACS 3.2.1, 3.2.2, 3.2.3, 3.3.1, or 3.3.2) to 4.1.
The ACS 3.2.x or 3.3.x upgrade package contains three CDs:
– ACS 3.3.3 Upgrade CD. Use this CD to upgrade from ACS 3.2.x or 3.3.x to ACS 3.3.3.
– ACS 4.1 Upgrade CD. After upgrading to ACS 3.3.3, use this CD to upgrade to ACS 4.1.
– ACS 1113 Recovery CD for 1113. To restore the ACS 1113 system software, use the ACS SE
4.1 Recovery CD for 1113.
Note If you are upgrading on an ACS 1111 or 1112 device and need to restore the ACS 1111
or 1112 system software, obtain the required recovery CD from the Cisco Technical
Assistance Center (TAC). For information on contacting the Cisco TAC, see
Obtaining
Technical Assistance, page xviii.
2. ACS SE 3.3.3 to 4.1.
The ACS SE 3.3.3 to 4.1 upgrade package includes:
– ACS SE 4.1 Upgrade CD. Use this CD to upgrade an existing ACS SE 3.3.3 installation to ACS
4.1.
– ACS 4.1 Recovery CD for 1113. Use this CD to restore the Cisco 1113 system software if the
system fails.
Note If you are upgrading on an ACS 1111 or 1112 device and need to restore the ACS 1111
or 1112 system software, obtain the required recovery CD from the Cisco Technical
Assistance Center (TAC). For information on contacting the Cisco TAC, see
Obtaining
Technical Assistance, page xviii.
3. ACS SE 4.0.1 to 4.1.
The ACS SE 4.0 to 4.1 upgrade package includes two CDs:
– ACS SE 4.1 Upgrade CD. Use this CD to upgrade an existing ACS SE 4.0.1 installation to ACS
4.1.
– ACS 4.1 Recovery CD for 1113. Use this CD to restore the Cisco 1113 system software if the
system fails.

Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Specifications

General

Brand	Cisco
Model	CSACSE-1111-K9 - Secure Access Control Server Solution Engine
Category	Software
Language	English