Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine User Manual

5-4
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
Chapter 5 Upgrading and Migrating to Cisco Secure ACS Solution Engine 4.1
Upgrade Procedure
Upgrade Procedure
You can perform a full upgrade from:
• ACS SE 4.0.1 to ACS SE 4.1.
• ACS SE 3.3.3 to ACS SE 4.1
Performing a Full Upgrade From ACS SE 4.0.1 to ACS SE 4.1
This section describes the procedure for performing a full upgrade from ACS SE 4.0.1 to ACS SE 4.1.
Before You Begin
Make a backup of your existing data and configuration.
To upgrade ACS SE 4.0.1 to ACS SE 4.1:
Step 1 Obtain the ACS 4.0 to 4.1 upgrade package.
Step 2 If the ACS SE is running Cisco Security Agent, you must disable the CSAgent service before upgrading.
You can do so at the console or in the web interface (ACS GUI). Using the:
• Console, enter show. If the CSAgent service is running, enter stop csagent.
• Web interface, choose System Configuration > Appliance Configuration and verify that the CSA
Enabled check box is not checked. If it is checked, uncheck the CSA Enabled check box and click
Submit.
Step 3 If you do not already have a GUI administrator account on the ACS SE, create a new GUI administrator
account from the web interface:
a. Start the web interface.
b. Click Administration Control.
The Administration Control page opens.
c. Click Add Administrator.
The Add Administrator page opens.
d. Add a new administrator and grant all administrative privileges to the administrator.
Note When you create a GUI administrator account, you will have two administrator accounts for the
ACS SE: one each for a GUI and CLI.
Warning If you do not have a GUI administrator account; then, after the upgrade is complete, you will
not be able to log in to the ACS SE from the web interface.
Step 4 Insert the ACS SE 4.1 Upgrade CD into the CD-ROM drive on the distribution server (the server from
which you are performing the upgrade).
Step 5 Download the ACS Management Upgrade package:
a. Open the upgrade CD.
b. Go to the /Upgrade Appliance management ACS 4.1 folder.

Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Specifications

General

Brand	Cisco
Model	CSACSE-1111-K9 - Secure Access Control Server Solution Engine
Category	Software
Language	English