5-5
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
Chapter 5 Upgrading and Migrating to Cisco Secure ACS Solution Engine 4.1
Upgrade Procedure
c. Double-click the autorun.bat icon.
The download utility starts. You are prompted to enter the hostname or IP address of the appliance,
as shown in
Figure 5-1.
Figure 5-1 Appliance Prompt
d. Enter the hostname or the IP address of the distribution server and then click Install.
The web interface starts.
e. Log in to the web interface.
f. Choose System Configuration > Appliance Upgrade Status.
The Appliance Upgrade page opens, as shown in Figure 5-2.
Figure 5-2 Appliance Upgrade Page
g. Click Download.
The Appliance Upgrade Form page opens, as shown in Figure 5-3. On this page you enter the IP
address of the distribution server.
To Next Page
Loading...
