Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine User Manual

4-10
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
Chapter 4 Administering Cisco Secure ACS Solution Engine
Working with System Data
Step 9 At the Enter FTP Server Password prompt, enter your FTP server password and press Enter.
Result: The ACS SE displays a series of messages detailing the writing and dumping of the files, and
the stopping and starting of services. At file transfer conclusion the system displays the following
messages:
Transferring ‘Package.cab’ completed
Press any key to finish.
This message indicates the ACS SE has packaged and transferred the .cab file as specified and restarts
services.
Step 10 Press Enter.
Result: The system returns to the system prompt.
Exporting Logs
This section details the procedure for exporting ACS SE log files to an FTP server for further
examination and processing. Using the exportlogs command, you can enter the name of the log or logs
to export, or select log names from a list.
Before You Begin
You must have the FTP server address and pathname, as well as the proper credentials for writing to the
FTP server (username and password).
Caution Performing this procedure stops and restarts all services, and will interrupt use of the ACS SE.
To export log files to an FTP server:
Step 1 Log in to the ACS SE. For more information, see Logging In to the Solution Engine From a Serial
Console, page 4-2.
Step 2 Type exportlogs logname, where logname is the name of the log you want to export.
Tip You can enter more than one log name and separate each with a space. If you enter no log name,
after you press Enter, the system displays the names of the log files available for export.
Caution Performing this procedure stops and restarts all services, and will interrupt use of the ACS SE.
Step 3 Press Enter.
Step 4 At the prompt, enter the IP address or hostname of the FTP server and press Enter.
Step 5 At the prompt, enter your FTP server username and press Enter.
Step 6 At the prompt, enter your FTP server password and press Enter.
Step 7 At the prompt, enter the FTP server directory pathname and press Enter.

Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Specifications

General

Brand	Cisco
Model	CSACSE-1111-K9 - Secure Access Control Server Solution Engine
Category	Software
Language	English