CHAPTER
2-1
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
2
Preparing for Installation
This chapter describes the safety instructions and site requirements for installing Cisco Secure ACS
Solution Engine (ACS SE) 4.1, and guides you through installation preparation. It contains:
• Safety, page 2-1
• Preparing Your Site for Installation, page 2-6
• Precautions for Rack-Mounting, page 2-8
• Required Tools and Equipment, page 2-9
Safety
This section provides safety information for installing this product.
Warnings and Cautions
Read the installation instructions in this document before you connect the system to its power source.
Failure to read and follow these guidelines could lead to an unsuccessful installation, and possibly
damage the system and components.
You should observe the following safety guidelines when working with any equipment that connects to
electrical power or telephone wiring. They can help you avoid injuring yourself or damaging the ACS
SE.
Note The English warnings in this document are followed by a statement number. To see the translations of a
warning into other languages, look up its statement number in the Regulatory Compliance and Safety
Information for the Cisco Secure ACS Solution Engine.
The following warnings and cautions are provided to help you prevent injury to yourself or damage to
the devices:
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
To Next Page
Loading...
Need help?
General