Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine User Manual

C-4
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
Appendix C Command Reference
Commands
username User account name used to authenticate the FTP session.
filepath Location under the FTP root for the server into which the backup will be sent.
Usage Guidelines
If you do not enter the parameters, the system prompts you for the information. Also you are prompted
to encrypt the backup. If you indicate that you want to encrypt the data, you are prompted for an
encryption password. For more information, see
Backing Up ACS Data From the Serial Console,
page 4-12.
Example
The following command employs the user account joeadmin to back up the ACS data to the backupdata
folder on the onyx FTP server:
Recommended Action backup onyx joeadmin backupdata
download
To download an upgrade image to the ACS SE use the download command. Executing the download
command establishes contact with the system specified, retrieves the manifest file from that system, and
automatically downloads the upgrade image to the ACS SE. The syntax is:
download [hostAddress]
Syntax Description
hostAddress The IP address from which the image will be sent
Usage Guidelines
This command is generally executed from within the web interface. After loading an upgrade image by
executing the download command, install the image by using the upgrade command.
Example
The following command syntax downloads an upgrade image from the system with the address
10.51.256.256:
download 10.51.256.256
exit
To log out of the system, use the exit command:
exit
Syntax Description
This command has no arguments or keywords.

Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Specifications

General

Brand	Cisco
Model	CSACSE-1111-K9 - Secure Access Control Server Solution Engine
Category	Software
Language	English