Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine - Page 117

C-9
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
Appendix C Command Reference
Commands
Examples
acsappl1> ping 10.19.253.228
Pinging 10.19.253.228 with 32 bytes of data:
Reply from 10.19.253.228: bytes=32 time=140ms TTL=120
Reply from 10.19.253.228: bytes=32 time=160ms TTL=120
Reply from 10.19.253.228: bytes=32 time=150ms TTL=120
Reply from 10.19.253.228: bytes=32 time=140ms TTL=120
Ping statistics for 10.19.253.228:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 140ms, Maximum = 160ms, Average = 147ms
acsappl1> ping -n 6 10.19.253.228
Pinging 10.19.253.228 with 32 bytes of data:
Reply from 10.19.253.228: bytes=32 time=130ms TTL=120
Reply from 10.19.253.228: bytes=32 time=140ms TTL=120
Reply from 10.19.253.228: bytes=32 time=140ms TTL=120
Reply from 10.19.253.228: bytes=32 time=140ms TTL=120
Reply from 10.19.253.228: bytes=32 time=130ms TTL=120
Reply from 10.19.253.228: bytes=32 time=130ms TTL=120
Ping statistics for 10.19.253.228:
Packets: Sent = 6, Received = 6, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 130ms, Maximum = 140ms, Average = 135ms
reboot
To restart the ACS SE, use the reboot command:
reboot
Note AAA services are temporarily halted while this command executes.
Syntax Description
This command has no arguments or keywords.
Example
The following command causes a soft reboot of the ACS SE:
reboot
restart
To restart one or more of the ACS services, use the restart command:
restart [service name(s)]