Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine User Manual

C-11
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
Appendix C Command Reference
Commands
rollback
To remove any patches and roll back to the originally installed version, use the rollback command:
rollback [appName]
Syntax Description
appName Name of the program (provided as part of patch distribution) to remove a specific
patch and roll back to original installed version.
Usage Guidelines
Use this command to return ACS to its original condition after installing a patch program. The rollback
command has the effect of stopping all ACS services, copying all files in the backup directory to the
originally installed directories, restoring a specified list of Registry entries, and starting all ACS services
once again.
Example
The following command executes the program remvptch4 and returns the system to the state that existed
before the patch program was applied:
rollback remvptch4
set admin
To set the name of the ACS SE administrator, use the set admin command:
set admin [administratorname]
Syntax Description
administratorname Name of system administrator.
Usage Guidelines
Use the set admin command to reset the name of the ACS SE administrator. For more information, see
Resetting the Solution Engine Administrator Password, page 4-15.
Example
This command sets the administrator name to john:
set admin john
set dbpassword
To set the ACS SE database password, use the set dbpassword command. Subsequent prompts take you
through the process.
set dbpassword

Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Specifications

General

Brand	Cisco
Model	CSACSE-1111-K9 - Secure Access Control Server Solution Engine
Category	Software
Language	English