Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine User Manual

C-15
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
Appendix C Command Reference
Commands
Example
The following command shuts down the appliance:
shutdown
start
To start one or more of the ACS services, use the start command:
start [service name(s)]
Syntax Description
This command uses as an argument the name of the service or services to be started.
Usage Guidelines
Use the start command to start any ACS service. You can determine the status of each service by using
the show command. For more information, see
Starting Solution Engine Services From a Serial Console,
page 4-5.
Example
The following command starts the CSAuth and CSAgent services:
restart csauth csagent
stop
To stop one or more of the ACS services, use the stop command:
stop [service name(s)]
Note Services subject to this command are halted until restarted, which may interfere with AAA services.
Note When you stop the CSAgent service, not only does the ACS SE stop CSAgent, but it also changes the
startup type to manual. This action has the effect of keeping it stopped; even after reboot. Likewise,
starting CSAgent resets the startup type to automatic.
Syntax Description
This command uses as an argument the name of the service or services to be stopped.
Usage Guidelines
Use the stop command to stop any ACS service. You can determine the status of each service by using
the show command. For more information, see
Stopping Solution Engine Services From a Serial
Console, page 4-4.

Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Specifications

General

Brand	Cisco
Model	CSACSE-1111-K9 - Secure Access Control Server Solution Engine
Category	Software
Language	English