5-9
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
Chapter 5 Upgrading and Migrating to Cisco Secure ACS Solution Engine 4.1
Upgrade Procedure
c. Click Add Administrator.
The Add Administrator page opens.
d. Add a new administrator and grant all administrative privileges to the administrator.
Note When you create a GUI administrator account, you will have two administrator accounts for the
ACS SE: one each for a GUI and CLI.
Warning
If you do not have a GUI administrator account; then, after the upgrade is complete, you will
not be able to log in to the ACS SE from the web interface.
Step 4 Insert the ACS SE 4.1 Upgrade CD into the CD-ROM drive on the distribution server (the server from
which you are performing the upgrade).
Step 5 Download the ACS Management Upgrade package:
a. Open the upgrade CD.
b. Go to the /Upgrade Appliance management ACS 4.1 folder.
c. Double-click the autorun.bat icon.
The download utility starts. You are prompted to enter the hostname or IP address of the appliance,
as shown in
Figure 5-6.
Figure 5-6 Appliance Prompt
d. Enter the hostname or the IP address of the distribution server and then click Install.
The web interface starts.
e. Log in to the web interface.
f. Choose System Configuration > Appliance Upgrade Status.
The Appliance Upgrade page opens, as shown in Figure 5-7.
To Next Page
Loading...
Need help?
General