Cisco CSR 1000v Series User Manual

For more information in general about configuring Call Home for the Cisco CSR 1000v, see Configuring
Call Home for the Cisco CSR 1000v, on page 229.
Note
SUMMARY STEPS
1.
configure terminal
2.
service call-home
3.
call-home
4.
profile name
5.
destination transport-method http
6.
no destination transport-method email
7.
destination address http url
DETAILED STEPS
PurposeCommand or Action
Enters configuration mode.configure terminal
Example:
Router# configure terminal
Step 1
Activates the call-home feature.service call-home
Example:
Router(config)# call-home
Step 2
Enters the Call Home configuration submode.call-home
Example:
Router(config)# call-home
Step 3
Enters the Call Home destination profile configuration submode
for the specified destination profile. If the specified destination
profile does not exist, it is created.
profile name
Example:
Router(config-call-home)# profile profile1
Step 4
Enables the HTTP message transport method.destination transport-method http
Example:
Router(cfg-call-home-profile)# destination transport-method
email
Step 5
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
173
Installing Cisco CSR 1000v Licenses
Configuring Call Home for Smart Licensing

Cisco CSR 1000v Series Specifications

General

Brand	Cisco
Model	CSR 1000v Series
Category	Network Router
Language	English