Cisco CSR 1000v Series

CHAPTER 7
Installing the Cisco CSR 1000v in KVM
Environments
•
Kernel Virtual Machine Support Information, page 113
•
KVM Support on OpenStack, page 114
• Installation Requirements for KVM—Cisco IOS XE Everest 16.6, page 114
•
Creating a Cisco CSR 1000v KVM Instance, page 115
•
Creating the Cisco CSR 1000v on OpenStack, page 122
•
Bootstrapping the CSR Configuration, page 126
•
Increasing Performance on KVM Configurations, page 129
•
Cloning the VM, page 130
• Installation Requirements for KVM—Cisco IOS XE Everest 16.5, page 130
• Installation Requirements for KVM—Cisco IOS XE Denali 16.4, page 131
• Installation Requirements for KVM—Cisco IOS XE Denali 16.3, page 131
• Installation Requirements for KVM—Cisco IOS XE 3.x, page 132
Kernel Virtual Machine Support Information
The CSR1000v supports the following Linux/KVM environments:
•
Red Hat Enterprise Linux (RHEL)
•
Red Hat Enterprise Virtualization (RHEV)
•
Ubuntu (beginning with Cisco IOS XE Release 3.11S)
Red Hat Enterprise Linux (RHEL), an enterprise virtualization product produced by Red Hat, based on the
Kernel-based Virtual Machine (KVM), is an open source, full virtualization solution for Linux on x86 hardware,
containing virtualization extensions.
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
113