Cisco CSR 1000v Series

PurposeCommand or Action
Enters Call Home configuration submode.call-home
Example:
Router(config)# call-home
Step 2
Enables AAA authorization.aaa-authorization
Step 3
Example:
Router(cfg-call-home)# aaa-authorization
By default, AAA authorization is disabled for Call
Home.
Note
Specifies the username for authorization.
aaa-authorization [username username]
Step 4
Example:
Router(cfg-call-home)# aaa-authorization
username user
• username username—Default username is callhome.
Maximum length is 64.
Configuring Syslog Throttling
To enable or disable Call Home syslog message throttling and avoid sending repetitive Call Home syslog
messages, perform the following steps:
SUMMARY STEPS
1.
configure terminal
2.
call-home
3.
[no] syslog-throttling
DETAILED STEPS
PurposeCommand or Action
Enters configuration mode.configure terminal
Example:
Router# configure terminal
Step 1
Enters Call Home configuration submode.call-home
Example:
Router(config)# call-home
Step 2
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
251
Configuring Call Home for the Cisco CSR 1000v
Configuring Syslog Throttling