Cisco CSR 1000v Series User Manual

•
We recommend that you install the broadband feature license before installing any memory add-on
licenses.
•
The VM must have enough memory allocated to accommodate the additional memory. See Understanding
the Cisco CSR 1000v Memory Allocation, on page 162 for more information.
For more information about configuring broadband support, see Broadband Access Aggregation and DSL
Configuration Guide and Intelligent Services Gateway Configuration Guide.
Installing Broadband Feature License
SUMMARY STEPS
1.
Obtain the PAK.
2.
enable
3.
show license udi
4.
Convert the PAK to a license by entering the PAK and the UDI into the Cisco Product License registration
portal http://www.cisco.com/go/license
5.
show platform software vmemory info
6.
configure terminal
7.
platform broadband {1K | 2K | 3K | 4K | 5K | 6K | 7K | 8K}
8.
platform memory add memory
9.
end
10.
license install stored-location-url
11.
write memory
12.
reload
13.
show license detail
14.
show platform software vmemory info
15.
(Optional) Install memory add-on licenses as needed. See Installing Memory Add-on License, on page
163.
DETAILED STEPS
PurposeCommand or Action
The PAK is provided to you when you order or purchase the right
to use a feature set.
Obtain the PAK.
Step 1
•
The PAK serves as a receipt and is used as part of the
process to obtain a license.
Enables privileged EXEC mode.enable
Step 2
Example:
Router> enable
•
Enter your password if prompted.
Displays all the UDI values that can be licensed in a system.show license udi
Step 3
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
167
Installing Cisco CSR 1000v Licenses
Installing CSL Feature Add-on Licenses for Cisco IOS XE 3.13S and Later

Cisco CSR 1000v Series Specifications

General

Brand	Cisco
Model	CSR 1000v Series
Category	Network Router
Language	English