Cisco CSR 1000v Series

In this version of the Call Home feature, you can change the destination of the CiscoTAC-1 profile.
• Message formatting—The message format used for sending the alert. The format options for a user-defined
destination profile are long-text, short-text, or XML. The default is XML. For the predefined CiscoTAC-1
profile, only XML is allowed.
• Message size—The maximum destination message size. The valid range is 50 to 3,145,728 bytes. The
default is 3,145,728 bytes.
• Reporting method—You can choose which data to report for a profile. You can enable reporting of
Smart Call Home data or Smart Licensing Data, or both. Only one active profile is allowed to report
Smart Licensing data at a time.
• Anonymous reporting—You can choose for your customer identity to remain anonymous, and no
identifying information is sent.
• Subscribing to interesting alert-groups—You can choose to subscribe to alert-groups highlighting your
interests.
This section contains the following subsections:
Creating a New Destination Profile
To create and configure a new destination profile, perform the following steps:
SUMMARY STEPS
1.
configure terminal
2.
call-home
3.
profile name
4.
[no] destination transport-method {email | http}
5.
destination address {email email-address | http url}
6.
destination preferred-msg-format {long-text | short-text | xml}
7.
destination message-size-limit bytes
8.
active
9.
reporting {all | smart-call-home-data| smart-licensing-data }
10.
end
11.
show call-home profile {name | all}
12.
show call-home smart-licensing
13.
show call-home smart-licensing statistics
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
237
Configuring Call Home for the Cisco CSR 1000v
Creating a New Destination Profile