Cisco CSR 1000v Series

CHAPTER 8
Installing the Cisco CSR 1000v in Microsoft
Hyper-V Environments
•
Microsoft Hyper-V Support Information, page 135
•
Microsoft Hyper-V Limitations, page 136
• Installation Requirements for Microsoft Hyper-V—Cisco IOS XE Everest 16.6, page 136
•
Manually Creating the Cisco CSR 1000v VM using the .iso File (Microsoft Hyper-V), page 137
• Installation Requirements for Microsoft Hyper-V—Cisco IOS XE Everest 16.5, page 141
• Installation Requirements for Microsoft Hyper-V—Cisco IOS XE Everest 16.4, page 142
• Installation Requirements for Microsoft Hyper-V—Cisco IOS XE Denali 16.3.1, page 143
• Installation Requirements for Microsoft Hyper-V—Cisco IOS XE 3.x, page 143
Microsoft Hyper-V Support Information
(Cisco IOS XE Release 3.12S or later and Cisco IOS XE Release Denali 16.3.1 or later)—the Cisco CSR
1000v supports installation on Microsoft Hyper-V using Windows Server 2012 R2.
(Cisco IOS XE Denali 16.2)—Installing Cisco CSR 1000v in a Microsoft Hyper-V environment is not
supported.
Note
The Cisco CSR 1000v installation on Microsoft Hyper-V requires the manual creation of a VM and installation
using the .iso file. Deploying the OVA template into a Microsoft Hyper-V environment is not supported.
The following Microsoft Hyper-V features are supported:
•
Live Migration
•
Snapshot
•
Move
•
Export
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
135