Cisco CSR 1000v Series User Manual

Cisco IOS XE
Release 3.15S, 3.16S,
3.17S
Cisco IOS XE
Release 3.14S
Cisco IOS XE
Release 3.12S and
3.13S
Cisco IOS XE
Release 3.11S
Cisco IOS XE
Release 3.10S
KVM Requirements
11111Virtual CPU cores
required
8 GB minimum
(Applies only to
creating the VM
using the .iso file. If
using the .qcow2 file
to install in an
OpenStack
environment, the
hard disk size must
be set to 0)
8 GB minimum
(Applies only to
creating the VM
using the .iso file. If
using the .qcow2 file
to install in an
OpenStack
environment, the
hard disk size must
be set to 0)
8 GB minimum
(Applies only to
creating the VM
using the .iso file. If
using the .qcow2 file
to install in an
OpenStack
environment, the
hard disk size must
be set to 0)
8 GB minimum8 GB minimumVirtual hard disk
size
VirtioVirtioVirtioVirtioVirtioSupported vNICs
2626262626Maximum number
of vNICs supported
per VM instance
RequiredRequiredRequiredRequiredRequiredVirtual CD/DVD
drive installed
(applicable only
when installing
using an .iso file)
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
134
Installing the Cisco CSR 1000v in KVM Environments
Installation Requirements for KVM—Cisco IOS XE 3.x

Cisco CSR 1000v Series Specifications

General

Model	CSR 1000v Series
Category	Network Router
Virtualization	Yes
Form Factor	Virtual Appliance
Routing Protocols	BGP, OSPF, EIGRP, RIP, IS-IS
Minimum Memory	4 GB
Minimum vCPUs	1
Cloud Platforms	Microsoft Azure
Interfaces	Virtual Interfaces
Supported Protocols	IPv4, IPv6
VPN Protocols	IPSec, DMVPN
Security	IPS
High Availability	VRRP, HSRP, GLBP
Management	NETCONF, RESTCONF, SNMP
Management Interface	CLI