Cisco CSR 1000v Series

PurposeCommand or Action
data. Selecting the all option reports data for both types of
data.
Returns to privileged EXEC mode.end
Example:
Router(cfg-call-home-profile)# end
Step 10
Displays the destination profile configuration for the specified
profile or all configured profiles.
show call-home profile {name | all}
Example:
Router# show call-home profile profile1
Step 11
Displays the current Call Home Smart Licensing settings for
the configured destination profiles.
show call-home smart-licensing
Step 12
Displays the Call Home Smart Licensing statistics.show call-home smart-licensing statistics
Step 13
Copying a Destination Profile
To create a new destination profile by copying an existing profile, perform the following steps:
SUMMARY STEPS
1.
configure terminal
2.
call-home
3.
copy profile source-profile target-profile
DETAILED STEPS
PurposeCommand or Action
Enters configuration mode.configure terminal
Example:
Router# configure terminal
Step 1
Enters the Call Home configuration submode.call-home
Example:
Router(config)# call-home
Step 2
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
239
Configuring Call Home for the Cisco CSR 1000v
Copying a Destination Profile