Cisco CSR 1000v Series

CHAPTER 6
Installing the Cisco CSR 1000v in Citrix XenServer
Environments
•
Citrix XenServer Support Information, page 105
•
Installation Requirements for Citrix XenServer: Cisco IOS XE Everest 16.6, page 106
•
Manually Creating the Cisco CSR 1000v VM Using the .iso File (Citrix XenServer), page 107
•
Installation Requirements for Citrix XenServer: Cisco IOS XE Everest 16.5, page 109
•
Installation Requirements for Citrix XenServer: Cisco IOS XE Everest 16.4, page 109
•
Installation Requirements for Citrix XenServer: Cisco IOS XE 16.3, page 110
•
Installation Requirements for Citrix XenServer: Cisco IOS XE 3.x, page 111
Citrix XenServer Support Information
Supported Releases
The Cisco CSR 1000v, using Cisco IOS XE 3.10S and later (Cisco IOS XE Denali 16.2 is not supported), is
supported in the Citrix XenServer environment.
Other Support Information
The Cisco CSR 1000v installation on Citrix XenServer requires the manual creation of a VM and installation
using the .iso file. Deploying the OVA template into a Citrix XenServer environment is not supported in this
release.
The Cisco CSR 1000v supports the VIF vNIC type on the Citrix XenServer implementation.
The following Citrix XenServer features are supported:
•
Virtual machine power-cycle
•
Interface add and delete
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
105