Cisco CSS5 SSL K9 - Syst. CSS11500 SSL MODULE - Figure 2-12 Connecting a CSS 11503 AC Power Cord

2-29
Cisco 11500 Series Content Services Switch Hardware Installation Guide
78-16421-01
Chapter 2 Cabling and Troubleshooting the CSS
Connecting the Power Cord
Figure 2-12 Connecting a CSS 11503 AC Power Cord
3.
Plug the power cord into a dedicated 3-wire grounding receptacle.
4. See the “Powering Up the CSS” section to power on the CSS.
Note The CSS 11503 power supply is autosensing for voltage and frequency, and it
requires no additional modifications.
1 Power switch 2 AC power connector
100-240V
~
50-60 Hz
5A
430 W
59543
2
1