Cisco D9800 - Page 164

DescriptionURI Argument
Redundancy Trigger on Link Loss.
Type: String
Values: "Yes"
This value is
read-only.
Note
lnklostrig
Redundancy Trigger on Transport Loss.
Type: String
Values: "Yes"
This value is
read-only.
Note
tslostrig
PSI acquisition mode.
Type: String
Values: "Auto", "Basic", "Custom"
acqmode
Network identifier.
Type: Integer
Values: 0 … 65535
netid
Frequency tuning mode.
Type: String
Values: "NIT", "User Cfg"
freqmode
Service List Mode (Version 2.75 and later)
"Degraded" is only available as a Write (POST) option. It is the
same as "Relaxed".
Note
•
Type : String
•
Values : "Rigorous", "Relaxed"
Service List Mode (Version 2.50 and earlier)
•
Type : String
•
Values : "Rigorous", "Degraded"
svclstmode
Enable NIT reception.
Type: String
Values: "Yes", "No"
niten
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
152
API Definitions
Input Configuration Command