Cisco D9800 User Manual

Expected output (values are for example purposes only):
<?xml version="1.0" encoding="ISO-8859-1" ?>
<pe>
<record><peid>1</peid><chn>802</chn><inp>RF1</inp></record>
<record><peid>2</peid><chn>0</chn><inp> </inp></record>
<record><peid>3</peid><chn>0</chn><inp> </inp></record>
<record><peid>4</peid><chn>0</chn><inp> </inp></record>
<record><peid>5</peid><chn>0</chn><inp> </inp></record>
<record><peid>6</peid><chn>0</chn><inp> </inp></record>
<record><peid>7</peid><chn>0</chn><inp> </inp></record>
<record><peid>8</peid><chn>0</chn><inp> </inp></record>
<record><peid>9</peid><chn>0</chn><inp> </inp></record>
<record><peid>10</peid><chn>0</chn><inp> </inp></record>
<record><peid>11</peid><chn>0</chn><inp> </inp></record>
<record><peid>12</peid><chn>0</chn><inp> </inp></record>
<record><peid>13</peid><chn>0</chn><inp> </inp></record>
<record><peid>14</peid><chn>0</chn><inp> </inp></record>
<record><peid>15</peid><chn>0</chn><inp> </inp></record>
<record><peid>16</peid><chn>0</chn><inp> </inp></record>
<record><peid>17</peid><chn>0</chn><inp> </inp></record>
<record><peid>18</peid><chn>0</chn><inp> </inp></record>
<record><peid>19</peid><chn>0</chn><inp> </inp></record>
<record><peid>20</peid><chn>0</chn><inp> </inp></record>
<record><peid>21</peid><chn>0</chn><inp> </inp></record>
<record><peid>22</peid><chn>0</chn><inp> </inp></record>
<record><peid>23</peid><chn>0</chn><inp> </inp></record>
<record><peid>24</peid><chn>0</chn><inp> </inp></record>
<record><peid>25</peid><chn>0</chn><inp> </inp></record>
<record><peid>26</peid><chn>0</chn><inp> </inp></record>
<record><peid>27</peid><chn>0</chn><inp> </inp></record>
<record><peid>28</peid><chn>0</chn><inp> </inp></record>
<record><peid>29</peid><chn>0</chn><inp> </inp></record>
<record><peid>30</peid><chn>0</chn><inp> </inp></record>
<record><peid>31</peid><chn>0</chn><inp> </inp></record>
<record><peid>32</peid><chn>0</chn><inp> </inp></record>
</pe>
Input (GET all PE Info and request JSON format output):
curl -k -H "X-SESSION-ID: $token" "https://192.168.0.1/ws/v2/service_cfg/pe?js=1"
Expected output (values are for example purposes only):
{
"pe": {
"record": [
{
"peid": "1",
"chn": "802",
"inp": "RF1"
},
// data for items peid: 2 to peid: 31 omitted to save space in document
{
"peid": "32",
"chn": "0",
"inp": " "
}
]
}
}
Input (GET single PE Info and request default XML format output):
curl -k -H "X-SESSION-ID: $token" "https://192.168.0.1/ws/v2/service_cfg/pe?peid=1"
Expected output (values are for example purposes only):
<?xml version="1.0" encoding="ISO-8859-1" ?>
<pe>
<record><peid>1</peid><chn>802</chn><inp>RF1</inp></record>
</pe>
Input (GET single PE peid and chn info only and request JSON format output):
curl -k -H "X-SESSION-ID: $token" "https://192.168.0.1/ws/v2/service_cfg/pe?peid=1&chn&js=1"
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
175
API Definitions
PE Configuration Command

Cisco D9800 Specifications

General

Brand	Cisco
Model	D9800
Category	Receiver
Language	English