Cisco D9800 User Manual

DescriptionOutput Field
ABR Ethernet link status
Type: String
Values: "Down", "Up"
iplinkstat
ABR Signal Encapsulation Lock Status
Type: String
Values: "None", "Active"
ipsignal
Bit rate of the input transport stream
Type: Float
Values: 0…4294.967295 Mbps
inputrate
Network Name
Type: String
Values: Up to 64 characters
netname
Network ID
Type: Integer
Values: 0…65535
netid
Transport ID
Type: Integer
Values: 0…65535
transid
Scrambling Mode
Type: String
Values: "Unk", "DES", "DVB", "BISS1", "BISS2", or "BISS3"
scrambmode
Last Tune Reason
Type: String
Values: "No_Change", "DR Change", "User_Change",
"Preset_Change", "Uplink_Change", or "NIT_TS_Change"
lsttunerea
Last Tune Reason
Type: String
Values: Up to 24 characters
tunereason
Frequency Tuning Mode
Type: String
Values: "NIT", "User Cfg"
freqmode
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
40
API Definitions
ABR Input Status Command

Cisco D9800 Specifications

General

Brand	Cisco
Model	D9800
Category	Receiver
Language	English