Cisco D9800 - Page 53

DescriptionOutput Field
Service List Mode (Version 2.75 and later)
•
Type: String
•
Values: "Rigorous", "Relaxed"
Service List Mode (Version 2.50 and earlier)
•
Type: String
•
Values: "Rigorous", "Degraded"
svclstmode
Enable BAT Reception
Type: String
Values: "Yes", "No", or "N/A"
baten
Enable NIT Reception
Type: String
Values: "Yes", "No"
niten
Enable SDT Reception
Type: String
Values: "Yes", "No"
sdten
Enable PAT Reception
Type: String
Values: "Yes", "No"
paten
Bit rate of the input transport stream
Type: Float
Values: 0…4294.967295 Mbps
rate
Dowload bitrate of the input transport stream
Type: Float
Values: 0…4294.967295 Mbps
dlrate
Buffer level current queue 1
Type: Float
Values: 0…4294.967295 Mb
buflvlcurq1
Buffer level current queue 2
Type: Float
Values: 0…4294.967295 Mb
buflvlcurq2
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
41
API Definitions
ABR Input Status Command