Cisco DX650 - Put Call on Hold; Remove Call from Hold on Different Line; Mute; Mute or Unmute Call

Put call on hold
Procedure
Step 1
Make sure that the call you want to put on hold is highlighted.
Step 2
Press .
Remove call from hold on different line
Procedure
Step 1
Select a line. Doing so may cause a held call to resume automatically:
•
If a reverting call is on the line, that call resumes.
•
If more than one reverting call is on the line, the oldest reverting call resumes.
•
If a nonreverting held call is the only call on the line, the nonreverting held call resumes.
Step 2
If necessary, scroll to the appropriate call and press .
Mute
With Mute enabled, you can hear other parties on a call but they cannot hear you. You can use Mute with the
handset, speakerphone, or headset.
Mute or unmute call
Procedure
Step 1
To mute a call, press .
Step 2
To unmute a call, press again.
Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1)
26 OL-28931-01
Calling tasks
Mute