Cisco DX650 User Manual

Make call using on-hook abbreviated dial
Procedure
Step 1
Set up Abbreviated Dialing codes.
Step 2
To place a call, enter the Abbreviated Dialing code.
Suspicious call trace
If you are receiving suspicious or malicious calls, your system administrator can add the Malicious Call
Identification (MCID) feature to your phone. This feature enables you to identify an active call as suspicious,
which initiates a series of automated tracking and notification messages.
Notify system administrator about suspicious or harassing call
Procedure
Step 1
Tap Report.
Step 2
Tap Report Caller.
Your phone displays the message The caller has been reported as malicious. Your
administrator receives notification about the call with supporting information to take appropriate actions.
Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1)
OL-28931-01 57
Calling tasks
Suspicious call trace

Cisco DX650 Specifications

General

Resolution	800 x 480 pixels
Audio	Wideband audio
USB Ports	2 x USB 2.0
Display	7-inch capacitive touchscreen
Camera	HD 720p
Connectivity	Ethernet, Wi-Fi
Bluetooth	Yes
SIP Protocol	Supported
Speakerphone	Full-duplex
Headset Jack	3.5 mm
Network Interfaces	10/100/1000 Ethernet
Supported Protocols	SIP
Codecs	G.722
Power over Ethernet (PoE)	Yes, IEEE 802.3af
Weight	2.2 lbs