Cisco DX650 User Manual

Connect to wired network
Procedure
Connect an Ethernet cable from the network port to the network.
Share wired network connection with computer
Procedure
Step 1
Connect an Ethernet cable from the network port to the network.
Step 2
Connect an Ethernet cable from the computer port to a network port on the computer.
Connect to wireless network
Procedure
Step 1
Tap .
Step 2
Tap Settings.
Step 3
Toggle on Wi-Fi.
Step 4
Select a wireless network from the list of available networks.
Step 5
Enter your credentials and tap Connect.
Connect to hidden wireless network
Procedure
Step 1
Tap .
Step 2
Tap Settings.
Step 3
Toggle on Wi-Fi.
Step 4
Tap Add Network.
Step 5
Enter the Network Service Set Identifier (SSID), select the Security, enter your credentials and tap Save.
Step 6
Select the network and tap Connect.
Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1)
OL-28931-01 63
Phone customization and settings
Connect to wireless network

Cisco DX650 Specifications

General

Resolution	800 x 480 pixels
Audio	Wideband audio
USB Ports	2 x USB 2.0
Display	7-inch capacitive touchscreen
Camera	HD 720p
Connectivity	Ethernet, Wi-Fi
Bluetooth	Yes
SIP Protocol	Supported
Speakerphone	Full-duplex
Headset Jack	3.5 mm
Network Interfaces	10/100/1000 Ethernet
Supported Protocols	SIP
Codecs	G.722
Power over Ethernet (PoE)	Yes, IEEE 802.3af
Weight	2.2 lbs