Cisco M10-RM - Page 510

Index
IN-4
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-14209-01
using FTP 20-12
using RCP 20-16
using TFTP 20-10
guidelines for creating and using 20-8
invalid combinations when copying 20-4
system contact and location information 18-10
types and location 20-9
uploading
preparing
20-10, 20-12, 20-15
reasons for 20-8
using FTP 20-13
using RCP 20-17
using TFTP 20-11
configuring 6-10
connections, secure remote 5-25
countermeasure tkip hold-time command 11-17
crypto software image 5-25
CSID format, selecting 13-14
D
Data Beacon Rate 6-30
data rate setting 6-7
data retries 6-32
data volume 4-14
daylight saving time 5-30
debug command 21-2
default commands 3-4
default configuration
banners
5-35
DNS 5-33
password and privilege level 5-4
RADIUS 5-10, 13-4
resetting 22-19
SNMP 18-5
system message logging 21-3
system name and prompt 5-32
TACACS+ 5-15, 13-25
default gateway 4-13
default radio settings
description of
4-7
default username 4-2
del command 22-21
delivery traffic indication message (DTIM) 6-30
DFS 6-16
DHCP server
configuring access point as
5-22
receiving IP settings from 4-12
directories
changing
20-3
creating and removing 20-4
displaying the working 20-3
disable web-based management 2-15
diversity 6-24
DNS
default configuration
5-33
displaying the configuration 5-35
overview 5-33
setting up 5-34
domain names
DNS
5-33
Domain Name System
See DNS
dot11 aaa mac-authen filter-cache command
11-15
dot11 extension aironet command 6-27
dot11 extension power native command 4-28
dot11 holdoff-time commands 11-16
dot11 interface-number carrier busy command 6-33
dot1x client-timeout command 11-16
dot1x reauth-period command 11-17
downloading
configuration files
preparing
20-10, 20-12, 20-15
reasons for 20-8
using FTP 20-12
using RCP 20-16
using TFTP 20-10
image files