Index
IN-5
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-14209-01
deleting old image 20-22
preparing 20-19, 20-23, 20-27
reasons for 20-18
using FTP 20-24
using RCP 20-29
using TFTP 20-20
DTIM 6-30
duplex, Ethernet port 5-18
Dynamic Frequency Selection 6-16
blocking channels 6-19
CLI commands 6-18
configuring a channel 6-19
confirming DFS enabled 6-18
E
EAP authentication, overview 11-4
EAP-FAST 9-1, 9-2
EAP-FAST authentication 11-20
EAP-MD5 authentication
setting on client and access point
11-22
EAP-SIM authentication
setting on client and access point
11-22
EAP-TLS
applying EAP method profiles to
11-17
EAP-TLS authentication
setting on client and access point
11-21
edit CLI commands 3-6
editing features
enabling and disabling
3-6
keystrokes used 3-6
wrapped lines 3-7
enable password 5-6
enable secret password 5-6
encapsulation dot1q command 14-6
encapsulation method 6-27
encrypted software image 5-25
encryption command 10-4
encryption for passwords 5-6
error and event messages C-1
error messages
802.11 subsystem messages
C-7
access point/bridge messages C-25
association management messages C-5
Cisco discovery protocol messages C-25
CLI 3-4
during command entry 3-4
explained C-2
external radius server error messages C-26
inter-access point protocol messages C-20
local authenticator messages C-21
LWAPP error messages C-26
mini IOS messages C-24
sensor messages C-27
setting the display destination device 21-5
severity levels 21-7
SNMP error messages C-28
software auto upgrade messages C-3
SSH error messages C-29
system message format 21-2
unzip messages C-6
Ethernet indicator 22-4
Ethernet speed and duplex settings 5-18
Ethertype filter 1-xxi, 16-1
event log 2-5
event messages C-1
Express Security page 2-4, 4-16
Express Setup page 2-4
F
fallback role 6-3
fast secure roaming 12-1
files
copying
20-4
deleting 20-5
displaying the contents of 20-7
tar
To Next Page
Loading...
