Contents
viii
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-14209-01
Disabling and Enabling Short Radio Preambles 6-23
Configuring Transmit and Receive Antennas 6-24
Enabling and Disabling Gratuitous Probe Response 6-25
Disabling and Enabling Aironet Extensions 6-26
Configuring the Ethernet Encapsulation Transformation Method 6-27
Enabling and Disabling Reliable Multicast to Workgroup Bridges 6-28
Enabling and Disabling Public Secure Packet Forwarding 6-29
Configuring Protected Ports 6-30
Configuring the Beacon Period and the DTIM 6-30
Configure RTS Threshold and Retries 6-31
Configuring the Maximum Data Retries 6-32
Configuring the Fragmentation Threshold 6-32
Enabling Short Slot Time for 802.11g Radios 6-33
Performing a Carrier Busy Test 6-33
Configuring VoIP Packet Handling 6-33
Viewing VoWLAN Metrics 6-34
Viewing Voice Reports 6-34
Viewing Wireless Client Reports 6-37
Viewing Voice Fault Summary 6-38
Configuring Voice QoS Settings 6-38
Configuring Voice Fault Settings 6-39
Configuring Multiple SSIDs 7-1
Understanding Multiple SSIDs 7-2
Effect of Software Versions on SSIDs 7-2
Configuring Multiple SSIDs 7-4
Default SSID Configuration 7-4
Creating an SSID Globally 7-4
Viewing SSIDs Configured Globally 7-6
Using Spaces in SSIDs 7-6
Using a RADIUS Server to Restrict SSIDs 7-7
Configuring Multiple Basic SSIDs 7-8
Requirements for Configuring Multiple BSSIDs 7-8
Guidelines for Using Multiple BSSIDs 7-8
Configuring Multiple BSSIDs 7-8
CLI Configuration Example 7-10
To Next Page
Loading...
