Cisco Room Kit EQX - Route and Connect Antenna Cables

R1
R2
R3
R3
R1
R2
38 Copyright © 2024 Cisco Systems, Inc. All rights reserved.D15519.02 | 2024 JANUARY | Cisco Room Kit EQX Installation Guide
11. 2. Route the antenna cables and connect them to the codec
1. Route the antenna cables as shown in the illustration. 2. Connect the antenna cables to the codec.
It’s important to connect the correct antenna to the
correct connector on the codec.
For more details, see the full wiring diagram that were
shipped with the system. It’s also available online.
Codec
C
R3
R1
R2
To Bluetooth
antenna
To vertical
Wi-Fi antenna
To horizontal
Wi-Fi antenna